other

Smart Traffic Management Radar Sensor

According to the real time traffic flow rate conditions, it cooperates with the intelligent lighting centralized controller to automatically control the illuminance of the roadway lights according to the changing of city roads brightness, to achieve the purpose of intelligent public lighting management.

  • Brand:

    SOWIN
  • Payment:

    T/T
  • Product Origin:

    China
  • Color:

    Gray
  • Shipping Port:

    Guang Zhou
  • Lead Time:

    3 weeks

6000K ~ 2700K CCT Automatic - Changing at Rainy / Snowing / Foggy Time.







 Traffic Flow Analysis Management(Vehicles Speed and Counting)

With the development of society, traffic jam has become a major problem in modern travel. The methods to solve traffic jams include increasing road capacity, developing public transportation, and fully disclosing traffic conditions, among which traffic conditions are fully disclosed and real-time monitoring the Traffic condition information is the method with the lowest cost and the fastest solutions. CH-C105 traffic flow radar can realize Real-time monitoring of road vehicle information, regular reporting the vehicle ID number, coordinates, speed and other information.The radar can be applied on the road to detect the traffic information of the current road section.

The radar can be used with the video vehicle detector to complete the detection of vehicles within 100 meters and the statistics of traffic flow information.

 

Key Features:

Adopt 80GHz MIMO Technology;
Work around the clock, not affected by weather, light, temperature and other environments;
The farthest detection distance is 100m, up to 64 targets;
Support both incoming and outgoing detection
The power consumption of the product is small, and the size and structure design are suitable for installation;
Network port communication.
Support forward & side installation, easy install & debugging


Electrical Parameter:

Frequency :80GHz

Effective Bandwidth : 150MHz

Modulation Waveform :FMCW

Azimuth Detection Angle : -22°~ +22°

Pitch detection angle :  -10°~ +10°

Detect Speed Range:2 km/h ~250 km/h

Effect Distance :  110m

Testing Distance tolerance : ≤±1m

Communication Interface : Ethernet

Working Voltage: 9 V ~12V DC

Power Consumption :< 3W

Temperature Range:-40℃~+80℃


Cases Study:

   93km world smartest Shen Zhen Outer Ring Highway and Tunnel groups adopt Radar Motion Sensors to achieve Maximum Energy Optimization, to enhance the smarter city infrastructure.




Tunnel Lighting: 1. Automatic Dimming according to Natural Light Intensity, perfect solution for the Black & White Tunnel Effects--black and white hole syndrome 2. Linked with the Radar Motion Detection Sensor: when a vehicle passes, it is automatically Dimming according to the exterior tunnels' natural light intensity; when there is no vehicle passes, it returns to a safe illuminance.

Street Lighting: 1. Automatically Turn on & off the lamp according to the Sunset and Sunrise. 2. Automatically Dimming according to the Set Scene Timing -- Adaptive Scene Dimming Lighting. 3. Automatic Dimming according to Natural Light Intensity, automatic Turn On and Emergency Lighting in abnormal weather (such as Heavy Cloudy Weather, Heavy Rain, Snowing, Foggy, etc.).

With the help of Shenzhen Outer Ring Expressway Platform, the System integrates Lamp Control Module, Expert Analysis Module, Energy Consumption Monitoring Module, Emergency Module, fully demonstrates the advanced technology and scheme of the system, and helps the Outer Ring Expressway Management Team to lay the foundation for the development and popularization of Intelligent Street Lighting.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will get back to you as soon as possible.
Related Products
CH C208
According to the city road environment, it cooperates with the intelligent lighting centralized controller to automatically control the illuminance of the lamps according to the changing of environmental brightness, to achieve the purpose of intelligent public lighting management.
CH C101
The Motion Sensor aims at the using environment of street lighting, tunnels and factories etc., through the moving detection of vehicles, people or objects, the lighting fixtures are automatically controlled according to programming to realize intelligent lighting control. Traditional street lightings,  tunnels, factories lighting fixtures are mostly controlled by personnel inspection or regular control, which initially meets the needs of the scene, but still cannot achieve the effect of intelligent control. For example: Turn on or dimming to brighter when people is coming, and turn lights off when people go away; No matter which direction the person enters from, the lamps in the area will automatically light up or increase according to the setting; this equipment cooperates with the intelligent lamps to solve these problemsperfectly. It adopts the most advanced and popular LoRa wireless communication technology, the communication distance can reach 3 kilometers without repeater, and the actual measurement reach 1 kilometers, and the communication distance is adjustable.
CH RVVMS108
Key Features n Applicable to signal control systems, traffic information service systems, road traffic monitoring and other application scenarios. n High precision millimeter wave radar with 4 million low illumination camera. n Max. 8 lanes of multi-target motor vehicles detection, longitudinal distance of 100m. n High spatial resolution and strong penetration ability, support working in all-weather environment, not affected by rain, fog, strong wind, dust, light, etc. n Built-in deep learning algorithm, support intelligent recognition function, support license plate recognition and target fully structured. n Supports detection of multiple targets’ position, lane, speed, direction and other info. n It supports lane statistics, traffic flow, speed, status, queue, time distance, spacing, Qty.of parking areas, avg.delay, space occupancy and time occupancy data, and supports statistical upload from 1 to 3600 seconds. n Supports traffic evaluation data output, including congestion, queue length, etc. n Each lane supports 2 virtual coils to output vehicle entry and exit signals, the virtual coil positions are configurable. n Fog penetration, strong light suppression, wide dynamic range, and has multiple white balance modes to suit various scene requirements. n Support Network & RS-485 data upload. Parameters Millimeter Wave Radar Target Type People / Motor Vehicles / Non-Motor Vehicles Max. Qty. of Detection 128 Working Frequency 80 ~ 81GHz Transmit power 12dBm(RFout)+18dB(ANTgain) Speed Detect Range -250 km/h ~ 250 km/h Detection Mode Doppler moving target detection, slow moving target detection, fast moving target detection Sweep bandwidth 136.5 MHz Modulation Waveform FMCW Max. Detection Distance 150m@0° ;    50m@士45° Horizontal angle measurement range 士45° Horizontal lobe 90° for MRR, 22° for  LRR Vertical Lobe 13°(-6dB) Refresh rate 12.5Hz Install Height 1~ 6m   Interface Serial Port 1 of RS-485 Port Snapshot Function Image Format JPEG Image resolution 2688 × 1520 Smart Functions Intelligent recognition Bayonet capture, license plate recognition, vehicle model recognition, vehicle body color recognition, brand, sub-brand. Exterior Interface Ethernet 2pcs RJ45 100 M / 1000 M Adaptive Ethernet port  Warning 1 Relay switch Function Features Min.illumination Colorful: 0.01 Lux @ (F1.2,AGC ON) Black & White: 0.001 Lux @ (F1.2,AGC ON) shutter 1/25s ~ 1/100,000s Video compression standards H.264, H.265, MJPEG Compression output bit rate 32 Kbps ~ 16 Mbps Video resolution 2688 × 1520 Frame rate 25 fps (2688 × 1520) Image Settings Saturation, brightness, contrast, white balance, gain adjustable through software Storage function TF General functions Heartbeat, password protection, NTP time synchronization Video format PAL General Specifications Dimmensions 226 mm (W) x 375.3 mm (H) x 206.4 mm (D) Working Temperature -30 °C ~ +70 °C Working Humidity 5% ~ 95% @ 40 °C,No condensation Working Voltage DC 24 V ± 10% Power Consumption 25 W Max. N.W. 3 kg ICR Type Infrared IP Rating IP67 Focal Length 12 mm Resolution 2688 × 1520 White Balance Automatic white balance Wide dynamic range Support Max. Energy Optimization achieving by the Smart Traffic Radar  and Video all-in-one Detecting Machine 
CH FU6030
SOWIN GXEC ANPR OCR flash tube is built for license plate recognition flash, ghosting control xenon tube, high-speed license plate flash, evidence imaging flash tube, and traffic camera OCR light applications where the real requirement is plate readability, not decorative brightness. The replacement must support short-pulse capture, controlled trigger response, optical-field stability, and repeatable contrast under night, rain, speed, and mixed-lane conditions. Replacement approval must be based on geometry, trigger coupling, pulse energy, optical field, duty cycle, environmental margin, and sample image behavior, not a first flash or appearance match. For Middle East and other harsh roadside programs across high heat, dust exposure, humidity, vibration, and cold-start regions, SOWIN supports batch enforcement-camera flash tube review routes with stable field behavior proven through repeated roadside use. Serious approval should be judged by high-heat output stability, dust exposure endurance, cold-start confidence, trigger reliability, reflector fit, and license-plate readability before scale procurement. Multiple tube geometries and material routes can be reviewed for fixed speed cameras, mobile enforcement systems, ANPR lanes, red-light cameras, legacy repair benches, OEM modules, and tender-driven spare-part programs. SOWIN can provide an engineer-reviewed parameter sheet, sample-matching checklist, Spec PDF support, and RoHS documentation. The goal is to help OEMs, integrators, repair teams, and procurement officers choose an enforcement flash route by evidence behavior, field-risk control, and repeatable roadside service logic - not by appearance alone.
CH J105 002
Centralized Controller is widely used in the Smart City Street Lighting Projects, Super-highway’s Lighting, Tunnel Lighting and the Industrial Lighting such as big scale factory and warehouse Lighting System, control lighting fixtures through the man-machine interface, data acquisition and lamps Monitoring.
CH STOU6038
SOWIN GXEC Monarch stroboscope flash tube review path is built for Nova-Strobe replacement tube, L-1903 strobe tube, portable stroboscope lamp, maintenance strobe repair tube, and BAX BBX DAX DBX flash tube service contexts where old portable stroboscopes, repair benches, incomplete part files, and maintenance workflows require careful geometry, trigger, and duty-window review. Replacement approval must be based on geometry, trigger coupling, pulse energy, optical field, duty cycle, environmental margin, and timing-output behavior, not a first flash or appearance match. For inspection, printing, packaging, RPM, textile, web, portable maintenance, and legacy stroboscope programs across heat, dust exposure, vibration, production duty, and repeated service cycles, SOWIN supports flash tube review routes with field-risk control and repeatable service logic. Serious approval should be judged by trigger reliability, reflector fit, optical contrast, timing behavior, and motion-freeze confidence before scale procurement. Multiple tube geometries and material routes can be reviewed for industrial stroboscopes, printing lines, packaging inspection, textile and web inspection, portable service tools, legacy repair benches, and tender-driven spare-part programs. Optional German-imported QUARTZ or SCHOTT glass routes can be reviewed when stronger thermal-load tolerance and reduced blackening risk are needed. The goal is to help OEMs, integrators, repair teams, distributors, and procurement officers choose a stroboscope flash route by timing visibility, motion-freeze control, and repeatable service performance - not by appearance alone.
CH FU6030
SOWIN GXEC desert traffic enforcement flash tube is built for -40C xenon flash tube, high heat traffic camera flash, dust resistant flash tube, Middle East speed camera flash, and thermal stable xenon tube projects where roadside temperature swing, solar heat, dust exposure, vibration, and cold-start stress can turn a normal replacement into a service problem. The replacement must protect trigger confidence, output stability, plate readability, and repeatable evidence behavior across harsh environmental cycles. Replacement approval must be based on geometry, trigger coupling, pulse energy, optical field, duty cycle, environmental margin, and sample image behavior, not a first flash or appearance match. For Middle East and other harsh roadside programs across high heat, dust exposure, humidity, vibration, and cold-start regions, SOWIN supports batch enforcement-camera flash tube review routes with stable field behavior proven through repeated roadside use. Serious approval should be judged by high-heat output stability, dust exposure endurance, cold-start confidence, trigger reliability, reflector fit, and license-plate readability before scale procurement. Multiple tube geometries and material routes can be reviewed for fixed speed cameras, mobile enforcement systems, ANPR lanes, red-light cameras, legacy repair benches, OEM modules, and tender-driven spare-part programs. SOWIN can provide an engineer-reviewed parameter sheet, sample-matching checklist, Spec PDF support, and RoHS documentation. The goal is to help OEMs, integrators, repair teams, and procurement officers choose an enforcement flash route by evidence behavior, field-risk control, and repeatable roadside service logic - not by appearance alone.
CH CC800-A/B
:root{ --ink:#0b1220; --muted:#48566b; --line:#d7e1ef; --bg:#eef2f7; --panel:#ffffff; --accent:#0b3b8a; --accentSoft:#e8f2ff; } .uos-wrap{margin:0; padding:14px; background:var(--bg); font-family:Arial,Helvetica,sans-serif; color:var(--ink); line-height:1.72} .uos-card{max-width:980px; margin:0 auto; background:var(--panel); border:1px solid var(--line); padding:14px; border-radius:0} .uos-title{margin:0 0 8px 0; font-size:16px; font-weight:900; letter-spacing:.2px} .uos-p{margin:0; font-size:14.2px} .uos-p + .uos-p{margin-top:10px} .uos-p strong{color:var(--accent); font-weight:900} .uos-badges{margin-top:10px; display:flex; flex-wrap:wrap; gap:8px} .uos-badge{border:1px solid var(--line); background:var(--accentSoft); padding:6px 10px; font-size:12px; border-radius:0} Urban-OS — Global IoT Lighting Center Grade Urban-OS is a municipal-grade lighting operating layer built on Cloud Server (or Sovereign On-Prem) + CH-800 gateway + SLC810/SLC910 lamp-level controllers. It delivers three governed outcomes: measurable energy savings, road & public safety, and value-added O&M ROI beyond electricity reduction. A Hybrid PLC + LoRa network keeps control stable across noisy feeders, transformers, and complex topology, while sensor networking enables demand-based dimming and precise fault localization. The dashboard provides map-based visibility, alarms, schedules, scenes, reports, and evidence-ready exports for committee review. Adaptive CCT 2700K↔6000K supports storm/fog/snow safety modes with traceable logs. With audit trails, role-based access, and OTA configuration, fleets stay consistent and defensible; when links degrade, cabinet intelligence enables offline autonomy until recovery. Open protocols & APIs prevent lock-in. Proven at scale, including 93 km corridor-grade deployments across highways and tunnels. Hybrid PLC + LoRa Lamp-Level Control 2700K↔6000K Evidence-Ready Offline Autonomy Open APIs
Get the latest offers Subscribe for our newsletter
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will get back to you as soon as possible.

Home

Products

about

contact